Catalog
Ways of using the stamp/brand/branding iron
Marking stamps/branding iron is used in all possible ways to make a lasting imprint on wood, plastic materials, leather imitation leather, clay.
Marking in timber industry
- Marking pallets, wood-block pallets (EUR, EPAL, CD, DB, FS),
- Marking pallet boards,
- Burning in specific letters or numbers, interchangeable characters,
- Timber is marked after certain procession e.g. after drying in drying cameras IPPC, HT, KD, ISPM 15- after timber gradation,
- Marking trade mark, logo-type in this way making the product recognizable and exclusive.
Marking on plastic materials
In the process of hot compression the required picture is pressed on the surface with a heated stamp.
Hot compression
Relief is pressed/branded on leather, leather imitation, fabric or paper with partly heated stamp/cliché in hot pressing process. The picture is pressed on the printing surface with the help of thermo press.
Relief compression
Relief compression is a technology similar to hot compression and can be made by both special and hot pressing equipment. For the majority of materials heating is not necessary for printing two clichés are used for imprint or jutting out on each side of the processing material. Relief press is used to working with paper, cardboard, leather, plastic, clay materials to single out/mark special details.
Unusual marking
The required picture is heated with hot stamp and relief is pressed on surface in hot pressing process.
